Products List

Contact us

TEL:+8613861260989(manager)
  +8618052520570(salesman)
ADD:NO.8 XinKang road Changzhou Jiangsu China
EMAIL:cz-jl@cz-jl.cn(manager)
      yangzhen@cz-jl.cn(salesman)

News

Factors influencing the performance of insulation material

Issues time:2014-07-31 15:32:22

The following parameters affect the performance of insulation material:

1, insulation resistance and resistivity

Resistance is the reciprocal of resistivity conductance, resistance in unit volume. Conductive material is smaller, its resistance is greater, the reciprocal relationship, of insulating material, always hope that the resistivity is as high as possible.

2, the relative dielectric constant and dielectric loss tangent

Use of insulating material has two components: the electric network of mutual insulation and dielectric capacitors (storage). The former requires a relativelylow dielectric constant, which requires a relatively high dielectric constant, and both require tangent of dielectric loss angle is small, especially the insulating material used in high frequency and high pressure, the dielectric loss is small,all requirements of insulating materials with dielectric loss angle tangent small.

3, the breakdown voltage and electric strength

Material damage insulation in a strong electric field, lose insulation performance into conducting state, called the breakdown. The breakdown voltage signal is called the breakdown voltage (dielectric strength). Electrical strength is a distance of two electrodes breakdown occurs under specified conditions of voltage and under voltage applied between business, also is thebreakdown voltage of unit thickness tolerance. The insulating materials, thebreakdown voltage, electric strength value is good.

4, the tensile strength

In the tensile test, the maximum tensile stress. It is an experimental testapplication performance of mechanics of materials, the most representative ofthe most widely.

5, burning resistance

The insulating materials contact flame resist the ability to prevent furthercombustion or leave the flame. With the increasing application of insulatingmaterial, the resistance to flammability requirements is more important, peoplethrough various means, and improve the insulation resistance to fire.Combustion is higher, its security is better.

6, arc resistance

The required test conditions, the ability of the insulating arc along the surfaceof the material endurance. Tests using AC high voltage and low current, high voltage generated by the arc effect between the two electrodes, the insulating material is formed on the surface of the conductive layer of the time required to judge the insulation arc resistance of the composites. Time value is greater,the arc resistance.

7, the sealing degree

Good for oily, water sealing isolation.

The company since its establishment, to the industry to provide users withquality products and efficient services, be consistent from beginning to end.Adhere to the science and technology research and development as the core,to market and customer demand oriented, pay attention to management ofquality based, customer satisfaction as the goal, and strive to createenterprise culture.


CopyRight 2014 Changzhou Jinlong Insulation Material Co.,Ltd.

Tel:+86 18651998666 James Yang(General manager)+86 18921077800 Hawking Wang(Export Manager) Fax:86-519-86781081

ADD:No.9,Hehuan South Road,Zhonglou Development Zone,Changzhou City,Jiangsu Province,China.

Email:cz-jl@cz-jl.cn (James Yang) hawking79_wang@126.com(Hawking Wang)